Animal Surgical Equipment Accessories
PATTERSON VETERINARY SUPPLY INC Vaporizer Tec 3 EX Iso Standard Fill 250ml Extended Capacity, Each
Vaporizer Tec 3 EX Iso Standard Fill 250ml Extended Capacity
Instech PinPorts™, 25ga red, 10 sterile pouches of 5 (50 pcs)
The Instech PNP3F25R-50 is a sterile red 25ga PinPort™ set designed to provide fast, aseptic access to externalized laboratory animal catheters or tubing. Each port allows repeated dosing or sampling without needle use, supporting safer handling, improved catheter patency, and reduced contamination risk. The PNP3F25R-50 package includes ten sterile pouches, each containing five red 25ga PinPorts, making it suitable for multi-animal studies or high-throughput workflows.
Features
- Port Type: PinPort™ access port
- Gauge: 25ga
- Color: Red
- Packaging: 10 sterile pouches of 5 (50 total ports)
- Use Case: Aseptic dosing and sampling of externalized catheters
- Needle-Free Access: Supports safe, closed-system operation
- Compatibility: Works with PNP3M injectors for manual access
Instech Luer stub, 25ga (red) x 0.5in (12mm), 50 sterile pouches of 5
The Instech LS25S is a sterile 25‑gauge red luer stub used for connecting infusion tubing or catheters to syringes or other male luer fittings. It includes a polypropylene hub with a stainless‑steel blunt, deburred tip to prevent tubing damage. LS25S is supplied sterile in 50 pouches of 5 (total 250 per box), suitable for precise infusion and sampling workflows.
Features
- Gauge: 25ga (red hub)
- Length: 0.5 inch (12 mm)
- Connection Type: Female luer for tubing-to-syringe interfaces
- Hub Material: Polypropylene
- Tip Material: Stainless-steel, blunt and deburred
- Sterility: Sterile (EtO)
- Package Configuration: 50 pouches of 5 (250 total)
- Use Case: Infusion and sampling workflows in preclinical research
Instech Polyurethane tubing, medical grade, 1Fr. .007x.014in (0.18x0.36mm). 10m (33ft) spool, non-sterile.
The Instech BTPU‑014 is a 1Fr polyurethane intravascular tubing with a .007x.014in (0.18x0.36mm) profile, offering excellent flexibility, biocompatibility, and friction‑fit performance for small‑animal catheter applications. Supplied non‑sterile on a 10m (33ft) spool, it is commonly used in fabrication of mouse catheters and other micro‑bore implanted lines where stretch, durability, and precise flow characteristics are required.
Features
- Polyurethane intravascular tubing for small‑animal catheterization
- .007x.014in (0.18x0.36mm) dimensions; 1Fr size
- 10m (33ft) non‑sterile spool
- Good biocompatibility for implantation
- Stretchy material for secure friction‑fit connections
- Suitable for custom catheter fabrication in research workflows
Instech Polyurethane tubing, medical grade, 3Fr. .025x.040in (0.6x1.0mm). 30m (98ft) spool, non-sterile.
The Instech BTPU‑040 is a 3Fr polyurethane intravascular tubing with a .025x.040in (0.64x1.01mm) profile, offering excellent flexibility, biocompatibility, and kink resistance for implanted catheter applications. Designed to fit 22ga connectors, it provides a secure friction‑fit interface ideal for rat catheterization and other small‑animal infusion or sampling procedures. Supplied non‑sterile on a 30m (98ft) spool, it is widely used for fabricating durable laboratory research catheters.
Features
- Polyurethane intravascular tubing for small‑animal catheterization
- .025x.040in (0.64x1.01mm) dimensions; 3Fr size
- 30m (98ft) non‑sterile spool
- Fits 22ga connectors, swivels, and couplers
- Good biocompatibility and kink resistance
- Stretchy material for secure friction‑fit connections
Instech PE tubing, .018x.036in (0.5x0.9mm), 30m (98ft) spool, non-sterile. Fits 25ga.
The Instech BTPE‑25 is a PE‑25 low‑density polyethylene tubing sized at .018x.036in (0.5x0.9mm), designed to fit 25ga swivels, couplers, and other small‑diameter laboratory connectors. It provides excellent chemical compatibility with a stiff, low‑permeability flow path and is supplied non‑sterile on a 30m (98ft) spool for general external infusion or sampling applications.
Features
- PE tubing sized for 25ga connections
- .018x.036in (0.5x0.9mm) dimensions
- 30m (98ft) non‑sterile spool
- Good chemical compatibility and low air permeability
- Stiff, lightweight tubing for external use
- Not for intravascular or human use
Braintree Scientific Stainless Steel Brain Matrice, Mouse 40-75gr, 1mm Coronal
Stainless Steel Brain Matrices These highly polished high quality stainless steel matrices are precisely machined to ensure reproducible sections. The brain matrices allow the investigator to slice either coronal (perpendicular to center line) or sagittal (parallel to center line) sections through the brain at 1mm or 0.5mm intervals. **Sold for research purposes only and not for human use**
Braintree Scientific Ear Punch Pincher with vial holder, 2.75mm punch
Ear Puncher This puncher relieves the stress on the wrist during ID marking as it requires a very gentle pressure to cut a hole. The stainless steel puncher has a sloped edge which provides a cut rather than a punch, which minimizes animal discomfort. Now updated with Eppendorf holder. The little puck holds the lid of the Eppendorf tube, so the biopsy sample falls perfectly into the 1,5 mL tube. For your convenience we also sell these tubes in set of 100pcs. The ear puncher is autoclavable but should be lubricated afterwards for a long and trouble-free usage. **Sold for research purposes only and not for human use**
Braintree Scientific Syringe Heater for Sm Syringes (spiral), (3+) heating pads
Syringe Heater Kit Heating device for syringes that require temperature-controlled dispensing Heats syringe to approximately 185C Compatiblity Notes: Heating syringes over 100C with BS-300, BS-500, BS-8000 & BS-9000 model syringe pumps requires an affordable customized pump. Call for details. Digitally set the heater setpoint Temperature sensor in heating pad Setpoint retained in memory Controller will heat the syringe and hold the set temperature using an on/off or PID control algorithm Multiple syringe heater pads can be attached to the control unit Heated syringe can be mounted on a syringe pump Syringe Heater Kit includes Control-Unit power cable and Primary-Syringe-Heater-Pad **Sold for research purposes only and not for human use**
Braintree Scientific Dyets Powder Feeder Jar Snap on Lid (Lid only)
Dyets Powder feeding jar Snap on Lid. 100% stainless steel top for easy cleaning and durability. Complete set can be found under NC0496158. **Sold for research purposes only and not for human use**
Braintree Scientific Dyets Powder Feeder Jar only
Dyets Powder feeding jar. 100% stainless steel top for easy cleaning and durability. Set contains jar, lid, and follower. **Sold for research purposes only and not for human use**
Braintree Scientific Refresh Table Top Charcoal Filter Connection Kit
Refresh Table Top Filter connection kit. 6 feet of ID hose with connectors and clamps for connection to charcoal filter canister. **Sold for research purposes only and not for human use**
Braintree Scientific Change-A-Tip Deluxe Cautery Rep high temp fine tip 10/bx
Change-A-Tip ReplacementTips DEL-100 low-temp fine tip 10/box DEL-101 high-temp fine tip 10/box DEL-103 high-temp loop tip 10/box DEL-104 low-temp elongated fine tip 10/box DEL-105 high-temp 2" flex loop tip 10/box DEL-106 high-temp 2" flex fine tip 10/box DEL-109 high-temp 5" loop tip 10/box DEL-112 high-temp 5" fine tip 10/box DEL-110 contra angle fine tip 10/box DEL-111 high-temp circular tip 10/box DEL-121 high-temp vasectomy tip 10/box DEL-101-ADH fine tip w/sheath seal 10/box **Sold for research purposes only and not for human use**
Braintree Scientific Anesthesia Pole Stand w/Mayo Tray
Anesthesia Pole Stand for portable transport of EZ Anesthesia systems with a minimal footprint. Accommodates each of our three New Generation EZ Anesthesia systems. Convenient, slide-on mounting. Swivel top allows precise positioning. Accommodates two E-tanks. Stable five-wheel base. Optional Mayo Tray for surgical tools available - call for pricing **Sold for research purposes only and not for human use**
Braintree Scientific Stainless Steel Brain Matrice,Mouse 40-75gm, 0.5 mm Coronal
Stainless Steel Brain Matrices These highly polished high quality stainless steel matrices are precisely machined to ensure reproducible sections. The brain matrices allow the investigator to slice either coronal (perpendicular to center line) or sagittal (parallel to center line) sections through the brain at 1mm or 0.5mm intervals. **Sold for research purposes only and not for human use**